Aobosi FS-IC015 Manuel Utilisateur page 56

The induction hob or a
cooking zone has
turned itself off
unexpectedly, a tone
sounds and an error
code is displayed
(typically alternating
with one or two digits
in the cooking timer
display).
Warning Codes & Safety Protection
When the cooker experiences unsuitable operations from you or by other means. the cooker stops
functioning exhibiting relevant codes on the display screen. This is meant only for the protection of
the cooker and guidance to you.
Error Code
ON
E0
E1
E2
E3, E4
E5
E6
Maintenance
1. Clean after each used. Disconnect plug and wait the unit has cooled down.
2. Use a moist cloth with a mild liquid detergent to wipe off grease and stains and then let dry.
3. Maintain the unit clean,protect the cooktop from dust or insects by covering it when not in use.
4. For the ventilation part clean with tooth brush or cotton.
5. If something wrong with the unit, repaired by professionals only.
Technical fault.
No cookware is detected, incompatible cookware is not
Please note down the error letters
and numbers, switch the power to
the induction hob off at the wall,
and contact a qualified technician.
Reason
Waiting Status
centered on the cookware
IGBT sensor open circuit/short circuit
Internal overheat
Voltage > 270V , Voltage < 90V
Top plate sensor open/short
circuit
Top plate overheat
56