Amica SHC 11505/1 W Notice D'utilisation page 91

OPERATION
Oven functions and operation.
Oven with conventional heating
(including top + bottom heaters)
The oven can be warmed up using the bottom
and top heaters, as well as the grill. Operation
of the oven is controlled by the oven function
knob – to set a required function you should
turn the knob to the selected position,
as well as the temperature regulator knob – to
set a required function you should turn the
knob to the selected position.
The oven can be switched off by setting both
of these knobs to the position ""/"0".
Possible settings of the oven function
knob
0
Oven is off
Grill heater on
Setting the knob to this position al-
lows dishes to be grilled on the grate.
Top heater on
Setting the knob to this postion allows
the oven to be heated only with the
top heater switched on, e.g. use for
final baking from above.
0
Switching on the oven is indicated by two si-
gnal lights, R, L, turning on. The R light turned
on means the oven is working. If the L light
goes out, it means the oven has reached the
set temperature. If a recipe recommends pla-
cing dishes in a warmed-up oven, this should
be not done before the L light goes out for the
first time. When baking, the Llight will tem-
porarily come on and go out (to maintain the
temperature inside the oven). The R signal
light may also turn on at the knob position of
"oven chamber lighting".
91
Bottom heater on
When the knob is set to this position
the oven is heated using only the bot-
tom heater. Use for e.g. final baking
from the bottom.
Bottom and top heaters on
Setting the knob to this position
allows the oven to be heated con-
ventionally.
Separate oven lighting
By setting the knob to this position
the lighting inside the oven is swit-
ched on, e.g. use when washing the
oven chamber.
ECO Heating
This is an optimised heating function
designed to save energy when pre-
paring food. At this knob position, the
oven lighting is off.
L R