WINDTECH Windsos Cube 100 Mode D'emploi page 10

10
Extend the parachute and place all the panels neatly from 1 to 8 on the CUBE 100 and
from 1 to 12 on the CUBE 125.
Attach the sling to something solid that does not move and separate the left and right
side lines from the main webbing leaving the four center lines in between. Make sure the
lines are not tangled by separating them with your fingers while adding a little tension.
Fold the panels, starting from the upper right corner or vice versa. When placing the
fabric pannels make sure that the lines are in the center and place the extended panels
as flat as possible. The lines must be one on top of the other. Keep the order in the
pannels.