Pelgrim PVS34140N Manuel D'utilisation page 101

HIGH-TEMPERATURE ALARM
A high temperature can be caused for several reasons:
• The door has been opened for too long or too frequently.
• The door does not seal properly.
• Too much fresh food has been put in at the same time.
! Every time the appliance is switched on again, it takes a while until the
correct temperature is reached. For this reason, the alarm is disabled
for the first 24 hours after the appliance is switched on to prevent the
unnecessary activation of the alarm.
!
When the temperature remains too high, the flashing will continue when
the door is open.
OPEN DOOR ALARM
The alarm can be canceled by closing the door.
! If the door is open for more than 10 minutes, the alarm turns off
automatically and the set temperature value appears on the display. The
appliance continues to operate with the set values.
A signal will be given when the
temperature in the appliance is too
high. The set temperature shown in the
display and, if present, the LED lighting
will fl ash.
If the door of the appliance is open for
more than 1 minute, the symbol "do"
will appear on display B.
17