Making Ice Cubes; Removing And Attaching Shelves - Panasonic NR-B32FX2-XE Mode D'emploi

Making ice cubes

Open the freezer, pull out the upper drawer and take out the ice tray. Open the ice tray lid and fill water in the ice tray to
the water level line. Then close the lid and place back the ice tray.
When ice cubes are ready, pull out the upper drawer and take out the ice tray. Open the lid and slightly twist the ice tray
by holding its two sides, the ice cubes will drop from the ice tray. Then, put the ice box back into its place.

Removing and attaching shelves

Refrigerator
Wine rack
Vitamin-Safe Zone
12 12
Water level line
Glass shelves
Lift the inner side of the shelf
slightly and pull it out.
Lift the inner side of the shelf
slightly and pull it out.
Fruit and vegetables drawer
Pull out the drawer, hold the front part and lift it up diagonally, and remove it.
Humidity control plate
Pull the vegetable drawer towards you.
Then pull the plate of the humidity control
plate towards you.
Ice box
Refrigerator drawer
Pull the drawer towards you, lift the
front slightly and pull it out.
Slide the shelf horizontally.
To put the drawer back, press it down until it fits
into the hooks at all four corners.
If the case fails to engage in any of the hooks,
the case cannot slide in as it will hit the humidity
control plate.
Door shelf, sealed box
and bottle shelf
Lift it slightly and then
remove it.