Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
Problem
Items still wrinkled
after Wrinkle Prevent
(Wrinkle Away,
Wrinkle Release).
Water drips from the
nozzle when Steam
Cycle starts.
Sprayed water is not
visible during Steam
Cycles.
Extended time.
If a problem persists, contact a local Samsung service center.
42
English
DV8650M-03170X-00_EN.indd 42
Action
• Small loads of 1 to 4 items work best.
• Load fewer items. Load similar-type items.
• Take out the items immediately after drying is complete.
• This is steam condensation. The dripping water will stop after
a short time.
• Sprayed water is difficult to see when the door is closed.
• Sensor Dry automatically senses the moisture in the load
and shuts the dryer off when the selected dryness level is
reached.
The drying time can change according to the type and
amount of laundry. See the cycle chart for reference.
2017-01-06
4:37:03
Publicité
