Installation
B
28
English
DV8650M-03170X-00_EN.indd 28
7. Remove the glass holder, and switch
the positions of:
a. the hinge cover and the door handle.
b. the hinge holder and the glass-guide
holder
8. Remove the door lever, and then move
it to the other side as shown.
9. Remove the hole cover (C), and then
insert and tighten the glass holder using
the removed 14 screws.
10. Install the hole cover on the opposite
side as shown.
C
11. Reinstall the door on the front frame,
and then carefully insert and tighten
the 4 hinge screws.
2017-01-06
4:37:00