Husqvarna PG 510 Manuel D'utilisation page 8

Product positions
Operation position
Servicing position
CAUTION Only put the product in the
servicing position on a horizontal surface.
Tilted transport position
8
Lift transport position
Put a protection between the motor and the electrical
enclosure to prevent damage to the product.
To adjust the handlebar
The handle lock knobs are operated clockwise,
counterclockwise or put in idle position.
1. Loosen the lock knobs (A) and adjust the handle (B)
to idle position.
A
B
2. Tighten the lock knobs to set the position.
A
1146 - 001 - 29.04.2019