Ventilation Control - Honeywell VisionPRO IAQ Mode D'emploi

Ventilation control

Press to set ventilation timer
AUTO
DONE
Press to save & exit
40
VENT
Minutes
CANCEL
You can ventilate your home at any time:
Press MORE until the ventilation screen is dis-
played, then press
tion timer. You can set the timer to ventilate
from 20 to 180 minutes, in 20-minute incre-
ments. To turn off the ventilator, select 0.
Press DONE to save and exit, or press CANCEL to
exit without saving changes.
If programmed for auto-ventilation by the
installer, the thermostat will ventilate your
home as needed.
Auto/Off will turn off/on the automatic ventila-
tion only. Ventilation can still be requested by
using the timer when set to Off.

VisionPRO
or to set the ventila-
s t
IAQ
®