Wolf 100410 Mode D'emploi page 5

4. Put the new ear cushion on the ear cup.
5. Press them together until you hear a click.
6. Place the O-rings
•
To order spares and accessories, please contact the local supplier
Storage
• Do not store the hearing protector at temperatures exceeding +55°C, for example on a
dashboard or windowsill. Do not store the hearing protector at temperature below -20°C.
Under extremely cold conditions, warm the hearing protector before using.
Cleaning
• Simply wipe it with a soft cloth moistened with a mild soap or water. Do not dip it into the
water. This product may be adversely affected by certain chemical substances. Further
information should be sought from the manufacturer.
Safety
• This earmuffs is intended to protect your ears against hazard noise.
• The mounted earmuffs are worn at all times in noisy surroundings to avoid the risk of
hearing damage.
• Loud music can cause hearing damage.
• Avoid working in a noisy environment over extended periods of time.
• Acoustical warning, indication signals and environmental noises can sound different when
wearing hearing protection.
• The perception of warning signals in certain workplaces may be affected when using a sound
reproducing system.
• The output of the electrical audio circuit of this hearing protector may exceed the daily
limited sound level.
• The hearing protector provides safety-related audio input.
• The audibility of warning signals at specific workplaces may be impaired while using the
entertainment facility.
• If the recommendations given above are not adhered, the protection by the mounted
• earmuffs will be severely impaired.
• For best performance, the earmuffs are fitted, adjusted and kept maintenance in
accordance to manufacturer9s instruction.
• This product has been tested in accordance with harmonized European standards
EN 352-3:2020, EN 352-6:2020 and EN 352-8:2020 and complies with the requirements in
the PPE regulation (EU) 2016/425.
• This product has been tested in accordance with harmonized European standards EN 301
489-1 v2.1.1:2017, EN 301 489-17 V3.1.1:2017, EN 300 328 V2.1.1:2016, EN 62479:2010, EN
60065:2014 and complies with the requirements of radio equipment in the directive
2014/53/EU.
Symbols
Description of symbols used on the product. Familiarize yourself with them to reduce the risk of
personal injury and material damage.
100410 WOLF Helmet PRO
5/64