Wolf 100410 Mode D'emploi page 2

Battery installation
Ensure that the On/Off Knob is switched off.
•
•
Open the Battery Cover. Insert the tailor-made Lithium Battery into the Chamber and plug
the battery cord into the Power Connector in the correct direction as shown in the figure
to ensure that the power supply is connected. Close the battery cover.
•
Battery 1st warning sound is heard when the battery power of the headset falls to 20%.
Subsequent sound will be prompted in every 5th minute till the user re-charges the battery
or all power is completely discharged.
•
The manufacturer provides the tailor-made Lithium Battery. Other types of Lithium
Batteries are not recommended.
Re-charge battery
•
Insert an USB Type C charging cable into the charge port to re-charge the battery.
Charge indicator in red – charging.
•
Charge indicator in green – charging completed.
•
DAB+ Operation
• Turn on the hearing protection by turning the Power On/Off Knob (which combines Volume
Control) in clockwise direction and adjust the sound to your desired level.
<WOLF – Join the Pack= is shown on the LCD screen. The headset is now set in DAB+ mode
•
and will start the auto-scan to search DAB+ radio stations and the correct time for the clock
function.
• During the scanning, <searching...= appears on the display. When a station is found, the
DAB+ frequency, name and other messages are shown on the display. Press Tune - or Tune
+ to listen to the previous or next station.
• When you are listening to the radio station, press Menu to view the service provider9s
information.
•
To save your favorite stations, long-press Menu, then press Tune - or Tune +, the LCD
screen will display <Save Preset=, then press the Enter key, the LCD screen will show
<Preset Empty 1" where 1 is flashing. Press Tune - or Tune + to select the sequence number
that you want to save and then press =Enter= to confirm the preset no. A total of 10 preset
stations for DAB+ radio can be saved.
•
To listen to the preset stations, long-press Menu. Then press Tune + or Tune -, to select,
<Call Preset=, press Enter to confirm. Press Tune - or Tune + to choose your favorite
stations and press <Enter= to confirm.
Manual Tune - Long-press Menu <Auto Scan= will appear on the screen. Select <Manual
•
Tune= by pressing Tune - or Tune +. The frequency will be visible on the display, press Tune
- or Tune + to adjust to your desired frequency, auto scan will then be started to search all
stations within your selected frequency. After it has scanned, a list of stations will appear
on the display, and the hearing protection starts to play the 1st station automatically. To
listen to the next station, press <Enter=, then press Tune - or Tune + to select the stations.
Auto Scan - Long-press Menu, select Auto Scan and press Enter to confirm the setting.
•
Auto-Tune full scan starts to receive the DAB+ signal, If no stations are found, <No Service=
will appear on the display.
•
Time update function: Time setting can be adjusted to automatically synchronize the radio
time and date in the DAB Mode.
100410 WOLF Helmet PRO
2/64