Publicité
Les langues disponibles
Les langues disponibles
PC MENU SETUP
The VGA mode supported up to 1920X1080@60Hz, you can use this unit as a multimedia PC
monitor. When this unit works in PC mode, the following setup can be done.
Press [/&' 0(18] button
Through pressing [◄/►] button on the remote control, you can select menu sections (menu sections
consist of "SCREEN",
Press [
] or [2.] button to enter this menu section.
Press [
] or [2.] button on the remote control to select the item in this menu section, and then
press [ / ] button to adjust parameter value. Press [/&' 0(18] button to return to main menu
or [(;,7] button to exit from menu tables.
6&5((1
Select SCREEN section to adjust PC screen parameters (only available when inputting PC-RGB
signal). You may select Auto Adjust, H-Offset, V-Offset, Size, Phase and Position Reset.
127(
When your PC goes into standby mode, the screen will show as bellow. This unit will go into sleep
mode if no input signal in 5-20 minutes (depending on choice in TIME menu).
You can wake it up by waking up your PC or pressing [67$1'%<] button on the remote control.
on the remote
control
"PICTURE", "SOUND", "TIME", "LOCK",
SCREEN
Move
Return
MENU
NO SIGNAL
"SETUP").
A A uto Adjust
H-Offset
50
V-Offset
50
Size
50
Phase
50
Position Reset
Exit
Select
EXIT
OK
25
Publicité
