Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
Changing the LED light
e LED light of this appliance cannot be
changed by user. Contact aftersale or repair
service for replacement.
CLEANING
1. Unplug the appliance.
2. Remove all substances.
3. Clean the inside and outside walls with a
clean sponge or soft cloth using warm water
or 1 teaspoon of bicarbonate of soda to 1.2
liters of water.
4. Rinse well and wipe dry with a clean soft
cloth.
If the appliance is not to be used for a long
period of time then it is recommended to
appliance and leave the door open to allow the
air to circulate thus avoiding unpleasant odors.
Dusts behind the refrigerator and on the ground
shall be timely cleaned to improve the cooling effect
and energy saving.
e interior of the refrigerator should be cleaned
regularly to avoid odor.
GB-20
Check the door gasket regularly to make sure there
are no debris.
Please turn off the power before cleaning, remove
all food, shelves, drawers, etc.
Clean the door gasket with mild soap and water.
Use a soft cloth or sponge to clean the inside of the
refrigerator, with two tablespoons of baking soda
and a quart of warm water.
T hen rinse with water and wipe clean, and open the
door and dry it naturally before the power is turned
on.
For areas that are difficult to clean in the
refrigerator (such as narrow sandwiches, gaps or
corners), it is recommended to wipe them regularly
with a soft rag, soft brush, etc. and when necessary,
combined with some auxiliary tools (such as thin
sticks) to ensure no contaminant accumulation in
these areas.
Do not use soap, detergent, scrub powder, spray
cleaner, etc., as these may cause odors in the interior
of the refrigerator.
Clean the bottle frame, shelves and drawers with a
mild detergent and dry with a soft cloth.
Wipe the outer surface of the refrigerator with a
soft cloth dampened with soapy water, detergent,
etc., and then wipe dry.
ENGLISH
GB-21
Publicité
