Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
• To take the door off it is necessary to tilt the
unit backwards. You should rest the unit on
something solid so that it will not slip during
the door reversing process.
• All parts removed must be saved to do the
reinstallation of the door.
• The refrigerator inclination angle should be
less than 45°.
• Do not lay the unit fat as this may damage the
coolant system.
• You should rest the Appliance on something
solid e.g. a chair just below the top panel.
• We recommend that 2 people handle the unit
during assembly.
Follow the following stages to reverse the door
from its initial position.
Deposit doors
1. Remove the top right hinge cover
GB-14
2. Unscrew and remove the hinge with a cross-
slot screwdriver.
3. A. Return the hinge, take off the axle and fix
it at the other side.
B. Take off the door, then remove the door
limit block and place it to the opposite side.
C. Remove the top left hinge cover and put it
on the right side.
ENGLISH
GB-15
Publicité
