EINHELL GE-CT 18/28 Li Mode D'emploi page 13

•
Carefully check your machine and its fittings
for signs of damage every time before use. Do
not use the equipment unless the line spool is
installed correctly.
•
When you release the On/Off switch, the
line spool will continue to rotate and will
only gradually come to a standstill. A line
spool which is in the process of rotating to
a standstill can cause you or by-standers
injuries through cutting. Before you start any
work on the line spool, switch off the motor
and ensure that the line spool has come to a
standstill.
•
The danger zone has a radius of 50 ft. (15 m).
Bystanders may suffer blindness or injuries.
Keep a distance of 50 ft. (15 m) between
yourself and other people or animals.
Important: The line spool continues to run for
a few seconds after the motor is switched off .
The line spool continues to rotate!
SAVE THESE INSTRUCTIONS
Explanation of the warning signs on the
equipment (see Fig. 21)
1: Warning!
2: Wear goggles and ear muff s!
3: Protect from moisture!
4: Read the instruction manual before starting!
WARNING – Disconnect battery before
maintenance.
5: Keep other people out of the danger area!
6: The line spool continues to rotate!
7: Store the batteries only in dry rooms with an
ambient temperature of 50°F to 104°F (+10°C
to +40°C). Place only fully charged batteries
in storage (charged at least 40%).
Anl_GE_CT_18-28_Li_USA_SPK7.indb 13 Anl_GE_CT_18-28_Li_USA_SPK7.indb 13
EN
2. Layout and items supplied
2.1 Layout
1. Safety lock-off
2. On/Off switch
3. Tightening screw (additional handle)
4. Additional handle
5. Assembly nut
6. Edge guide
7. Line spool housing
8. Safety guard
9. Line cutter
10. Locking button for motor head tilt
11. Locking button for edge guide adjustment
12. Lock for rotatable motor head
13. Battery mount
14. Cordless string trimmer
15. Mounting screws (4x)
16. Release button
17. Angle adjuster
18. Ribbed push cover points
19. Spool cover
20. Line spool
21. Eyelet
22. Spool cover mounts
23. Recesses
24. Push-lock button
25. Battery capacity indicator button
26. Battery capacity indicator
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
store where you made your purchase at the latest
within 5 work days after purchasing the article and
upon presentation of a valid bill of purchase.
•
Open the packaging and take out the
equipment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
present).
•
Check to see if all the items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, keep the packaging until the end
of the guarantee period.
- 13 -
13.12.2022 10:17:01 13.12.2022 10:17:01