Recognized Receive Data; Transmitted Data; Transmitted Messages - Roland FC-300 Mode D'emploi

Table des Matières

Publicité

Equipement MIDI (en anglais)

1. Recognized Receive Data

System Realtime Message
Active Sensing
Status
FEH
When FC-300 receives Active Sensing, it measures time intervals
between incoming messages. If the subsequent message will not come
within 400 msec after the previous one, FC-300 turns off Active Sen-
sing for a period and stops measuring message intervals.
System Exclusive Message
Status
Data
F0H
iiH, ddH, ....., eeH
F0H
System Exclusive Status
ii
ID Number: The ID Number (manufacturer's ID) is
used to distinguish one manufacturer's System Exclu-
sive messages from another. Roland's manufacturer ID
is 41H. ID Numbers 7EH and 7FH are used as Universal
Non-realtime messages (7EH), and Universal Realtime
message (7FH) for extending the MIDI standard.
dd, ..., ee
00H-7FH (0-127)
F7H
EOX (End of System Exclusive)
System Exclusive messages that the FC-300 can receive are Data
Request (RQ1) and Data Set (DT1).
For a detailed explanation about Data Request (RQ1) and Data Set
(DT1), refer to "Roland System Exclusive Messages" (p. 59) and
"3. Exclusive Communications" (p. 64).
62
Status
F7H

2. Transmitted Data

Transmitted Messages

Channel Voice Message
Note Off
Status
Second
8nH
kkH
n = MIDI Channel Number
kk = Note Number
vv = Velocity
* Specifically when Patch Mode is selected.
Note On
Status
Second
9nH
kkH
n = MIDI Channel Number
kk = Note Number
vv = Velocity
* Specifically when Patch Mode is selected.
Polyphonic Key Pressure
Status
Second
AnH
kkH
n = MIDI Channel Number
kk = Note Number
vv = Polyphonic Key
Pressure
* Specifically when Patch Mode is selected.
Control Change
Status
Second
BnH
ccH
n = MIDI Channel Number
cc = Control Number
vv = Control Value
* Does not transmit while in System Exclusive Mode.
Bank Select
Status
Second
BnH
00H
BnH
20H
n = MIDI Channel Number
mm = Upper bytes of Bank Select Number
ll = Lower bytes of Bank Select Number
* Specifically when Standard Mode and Patch Mode are selected.
Third
vvH
0H-FH (ch.1-ch.16)
00H-7FH (0-127)
00H-7FH (0-127)
Third
vvH
0H - FH (ch.1-ch.16)
00H-7FH (0-127)
01H-7FH (1-127)
Third
vvH
0H - FH (ch.1-ch.16)
00H-7FH (0-127)
00H-7FH (0-127)
Third
vvH
0H-FH (ch.1-ch.16)
01H-1FH (1-31), 21H-5FH (33-95)
00H-7FH (0-127)
Third
mmH
llH
0H-FH (ch.1-ch.16)
00H-7FH (0-127)
00H-7FH (0-127)

Publicité

Table des Matières
loading

Table des Matières