Roland FC-300 Mode D'emploi page 63

Program Change
Status Second
CnH ppH
n = MIDI Channel Number
pp = Program Number
* Specifically when Standard Mode and Patch Mode are selected.
Channel Pressure
Status Second
DnH vvH
n = MIDI Channel Number
vv = Channel Pressure
* Does not transmit while in System Exclusive Mode.
Pitch Bend Change
Status Second
EnH llH
n = MIDI Channel Number
mm, ll = Pitch Bend
* Does not transmit while in System Exclusive Mode.
System Realtime Message
Start
Status
FAH
* Does not transmit while in System Exclusive Mode.
Continue
Status
FBH
* Does not transmit while in System Exclusive Mode.
Stop
Status
FCH
* Does not transmit while in System Exclusive Mode.
Active Sensing
Status
FEH
* During the normal operation, transmits at approx. 200 msec intervals.
* When message intervals are being monitored at the input section, the
output of Active Sensing messages will cease for a certain period of time
if the input interval exceeds 400 msec.
0H-FH (ch.1-ch.16)
00H-7FH (prog.1-prog.128)
0H - FH (ch.1-ch.16)
00H-7FH (0-127)
Third
mmH
0H - FH (ch.1-ch.16)
00 00H - 40 00H - 7F 7FH
(-8192 - 0 - +8192)
Equipement MIDI (en anglais)
System Exclusive Message
Status Data
F0H iiH, ddH, ....., eeH
System Exclusive Status
F0H
ii = ID Number 41H (65)
00H-7FH (0-127)
dd, ..., ee = data
F7H EOX (End of System Exclusive)
For a detailed explanation, see "Roland System Exclusive Messa-
ges" (p. 59) and "3. Exclusive Communications" (p. 64).
MIDI Machine Control (MMC)
Status Data
F0H 7FH, 7FH, 06H, com
Byte Description
F0H System Exclusive Status
7FH ID Number (Universal Realtime Message)
7FH Device ID (Broadcast)
06H Sub-ID#1 (Machine Control Command)
com Sub-ID#2 (MMC Command)
F7H EOX (End of System Exclusive)
* FC-300 can set the following MMC commands.
com
01H STOP
02H PLAY
03H DEFERRED PLAY
04H FAST FORWARD
05H REWIND
06H RECORD STROBE
07H RECORD EXIT
08H RECORD PAUSE
09H PAUSE
* Does not transmit while in System Exclusive Mode.
Status
F7H
Status
F7H
63