Installation - Daitsu AUD 90 Manuel D'instructions

A- Installing on the concrete wall:
Remove the mounting plate.
1-
It can be removed by unclamping the screw on the back of main
body.
Unit body
Outflow opening
Hook eyelet
When the cement has freeze, fit the mounting plate (use the washer
3-
and nut according to the following).
Washer
Sink bolt
B- Installing on the wooden wall:
1- Fix the mounting plate in the proper positions with tapping screw.
Wood screw
Washer
(large)
Wall mounting
22

INSTALLATION

Wall mounting
plate
Guide groove
Angle adjustment
screw
15
Aprox.
mm
70 mm
20 mm o más
plate
Fix the bolts in the proper position.
2-
(Decide the position with the mounting plate and pour cement into
the bolt holes).
Cement
70 mm
15-20 mm
Install the main body.
4-
Set the main body onto the upper end of the mounting plate and
clamp it as shown.
Unit body
10°
Aprox.
2- Same as the step 4 of A.
Unit body
10°
Aprox.
Angle adjustament screw
Angle adjustament screw