Listening to the satellite radio
Before operating, connect either one of the following (separately purchased) to the CD changer jack
on the rear of this unit.
• JVC SIRIUS radio DLP—Down Link Processor, for listening to the SIRIUS Satellite radio.
• XMDirect
TM
Universal Tuner Box—With a JVC Smart Digital Adapter (XMDJVC100: not
supplied), for listening to the XM Satellite radio.
Activating your subscription after connection
For SIRIUS Radio
1
Turn on the power.
2
Select "SAT" for the source.
JVC DLP starts updating all the SIRIUS
channels. (☞ "GCI update" below.)
• Once completed, JVC DLP tunes in
to CH184 (channel for subscription
guidance).
3
Check your SIRIUS ID.
☞ [93]
4
Activate your subscription.
Contact SIRIUS on the Internet at <http://
activate.siriusradio.com/>, or call SIRIUS
toll-free at 1-888-539-SIRIUS (7474).
• "Subscription Updated Press Any Key to
Continue" appears on the monitor once
subscription has been completed.
GCI (Global Control Information) update:
• If channels are updated after subscription, updating starts automatically, and no sound can be
heard.
For SIRIUS: "Channels Updating XX% completed" appears.
For XM: "UPDATING" appears.
• Update takes a few minutes to complete.
• Do not press any button or perform any operation until updating is completed.
For XM Radio
1
Turn on the power.
2
Select "SAT" for the source.
XMDirect
updating all the XM channels. "Channel 1"
is tuned in automatically. (☞ "GCI update"
below.)
3
Check your XM Satellite radio
ID.
It is labelled on the casing of the
XMDirect
also check it by tuning in to "Channel 0" (☞
next page).
4
Activate your subscription.
Contact XM Satellite radio on the Internet
at <http://xmradio.com/activation/> to
activate your subscription, or you can call
1-800-XM-RADIO (1-800-967-2346).
• Once completed, the unit tunes in to one
of the available channels (Channel 4 or
higher).
Listening to the radio / Listening to the satellite radio
TM
Universal Tuner Box starts
TM
Universal Tuner Box. You can
55