Télécharger Imprimer la page

Stanley DUBUIS BCL025G Manuel D'utilisation page 13

Coupe-cables hydraulique sur batterie

Publicité

Les langues disponibles

Les langues disponibles

LED INDICATIONS
Starting ON the tool
GREEN
GREEN
Stopping OFF of the tool
RED
RED
Battery charge level
-
-
-
-
-
-
Battery protection CUT-OFF
-
-
Temperature protection
YELLOW
YELLOW
ORANGE
ORANGE
Tool security
-
RED
Maintenance indication
ORANGE
Maintenance indication
ORANGE
Return for maintenance
-
RED
Tool connected to USB
-
BLUE
0412 - BCL025G - 13 KW Hydraulik GmbH – 96515 Sonneberg – Germany – www.kw-hydraulik.de
Press the button ON/OFF tool.
The 3 LED lighting GREEN for 1 second.
The front DEL lighting.
GREEN
The tool is ready for work.
Press the button ON/OFF tool.
The 3 LED lighting RED for 1 second. The tool switches OFF.
-
The tool switches OFF automatically without use during 10min.
RED
After powering ON the tool, if the LED battery is lighting GREEN, the battery is
full charged.
-
GREEN
After powering ON the tool, if the LED battery is lighting ORANGE, the battery
-
is half charged.
ORANGE
After powering ON the tool, if the LED battery is lighting RED, the battery is
-
discharged. The battery must be recharged. Replace the battery by a full
RED
charged battery.
If the battery is not powerful enough for one cycle, the tool is automatically
locked. The LED battery flashing RED.
The front DEL flashing.
RED
The battery must be recharged. Replace the battery by a full charged battery.
-
The front DEL flashing.
For user security, the tool is blocked automatically in case of problem. The
LED maintenance flashing RED during 10 seconds.
Press the button ON/OFF tool.
-
-
If the indication reappears, return the tool to the DUBUIS after-sales Service.
The LED maintenance lighting ORANGE all the time after ON to indicate the
future maintenance.
The user has 1000 cycles before the final block of the tool.
-
-
Return the tool to the DUBUIS after-sales Service.
The LED maintenance flashing ORANGE all the time after ON. The tool is
automatically locked after each cutting.
Press the button ON/OFF tool.
-
-
The user has 500 cycles before the final block of the tool.
Return the tool to the DUBUIS after-sales Service.
The LED maintenance flashing RED. The tool is definitively locked.
The front DEL flashing.
-
Return the tool to the DUBUIS after-sales Service.
When the tool is connected to the USB port, the LED maintenance lighting
BLUE during the connection.
-
-
If the temperature is out of range of use, the cycle and maintenance LED
flashing YELLOW and ORANGE. The tool can't be used.
LED lighting for 1 second.
LED flashing.
LED lighting.
English

Publicité

loading