Publicité
Les langues disponibles
Les langues disponibles
1
2
FIG. E
5. Lift support frame assembly up to the ceiling making sure the the word "front" on the top support frame faces the
the wood screws previously installed in the ceiling. Slide support frame towards narrow end of key-holes to lock
the frame in place.
secure it to the ceiling. Tighten all screws.
FIG. C
3. Hood heights between 40" to 50" require lateral support brackets to be
installed to the two top support frame cut off arms and their corresponding
4. Hood heights between 45" to 50" require a square support bracket to be
installed inside the support frame. Install square support bracket to top
support frame arms extend past lower support frame bracket with shorter
10
www.zephyronline.com
FIG. D
Publicité
