LG UB83-Z Mode D'emploi page 65

24
MAGIC REMOTE FUNCTIONS
Voice recognition(Depending on model)
Network connection is required to use the
voice recognition function.
1. Press the Voice recognition button.
2. Speak when the voice display window
appears on the left of the TV screen.
• The voice recognition may fail when
you speak too fast or too slow.
• Use the Magic Remote no further than
10 cm from your face.
• The recognition rate may
vary depending on the user's
characteristics (voice, pronunciation,
intonation and speed) and the
environment (noise and TV volume).
Registering Magic Remote
How to register the Magic Remote
BACK HOME
To use the Magic Remote, first
pair it with your TV.
1 Put batteries into the Magic
(Wheel)
Remote and turn the TV on.
2 Point the Magic Remote at your
P
TV and press the
(OK) on the remote control.
» If the TV fails to register the
MY APPS Magic Remote, try again
after turning the TV off and
back on.
How to deregister the Magic Remote
(BACK)
(Home)
How to use Magic Remote
BACK HOME
Wheel
P
MY APPS
Press the (BACK) and
(Home) buttons at the same time,
for five seconds, to unpair the
Magic Remote with your TV.
» Pressing and holding the
(EXIT to LIVE)
button will
let you cancel and re-register
Magic Remote at once.
y Shake the Magic Remote
slightly to the right and left or
press (Home), /
INPUT, buttons to make
the pointer appear on the
screen.
» The pointer will appear when
you turn the Wheel button.
(Depending on model)
y If the pointer has not been
used for a certain period
of time or Magic Remote is
placed on a flat surface, then
the pointer will disappear.
y If the pointer is not
responding smoothly, you can
reset the pointer by moving it
to the edge of the screen.
y The Magic Remote depletes
batteries faster than a normal
remote due to the additional
features.