Braun 5409 Mode D'emploi page 12

the safe use of the appliance and understand the hazards
involved. Children should not play with the appliance.
Cleaning and user maintenance should not be made by
children.
For hygienic reasons, do not share this appliance with other persons.
Description
1 Foil & Cutter cassette
2 On/off button
3 Charge indicator
4 Shaver power socket
5 Special cord set (design may differ)
6 Beard trimmer head with 5 combs * (see pictures)
7 Protection cap *
8 Travel case *
* not with all models
For electric specifications, see printing on the special cord set.
Charging
Recommended ambient temperature for charging is 5 °C to 35 °C.
The battery may not charge properly or at all under extreme low or high
temperatures. Recommended ambient temperature for shaving is 15 °C
to 35 °C. Do not expose the shaver to temperatures higher than 50 °C
for extended periods of time
• Using the special cord set (5), connect the shaver to an electrical outlet
with the motor switched off. When charging for the first time or when
the shaver is not used for a few months, leave the shaver to charge con-
tinuously for 4 hours.
• Once the shaver is completely charged, discharge the shaver through
normal use. Then recharge to full capacity. Subsequent charges will take
about 1 hour.
• A full charge provides up to 30 minutes of cordless shaving time depend-
ing on your beard growth. However, the maximum battery capacity will
only be reached after several charging/discharging cycles.
• 5-minute quick charge is sufficient for a shave.
• Type 5408 only: You can also shave by connecting the shaver
to an electrical outlet via the special cord set.
12