Screen Research CLCTS Manuel D'installation page 9

ENGLISH - Screen user manual
WARNING - - - - READ CAREFULLY BEFORE PERFORMING ADJUSTMENTS WARNING WARNING WARNING
Adjustments shown must be performed by authorised and specialised personnel only. Incorrect performance of the procedures described may result in damages to the
product which will not be covered by guarantee.
WARNING WARNING WARNING WARNING
UPPER END STOP MUST ALWAYS BE ADJUSTED AT 2mm FROM THE CASE" see picture on the right.
End stop is adjusted so as to allow the projection sheet to wind around the roller at least 1.5 times to avoid the sheet coming loose. Special attention must be paid when end
stops are adjusted in such a way that projection sheet unwinds beyond the factory setting. Incorrect adjustment of end stops can cause:
-Projection sheet coming away from the roller
-Projection sheet winding the wrong way, with ensuing damage to flatness of the projection surface and to winding mechanisms
-Breaking of bottom end black frame welding (framed screens)
-Excessive strain on motor with possible ensuing damage and activation of motor's thermal resistance
-Excessive winding of the end stop adjustment system with ensuing breaking of the mechanical part
WARRANTY WARRANTY
WARRANTY WARRANTY
Operators are reminded that in cases where seals have been tampered with and where any damages have resulted from incorrect adjustment, repair interventions shall not be
covered by guarantee.
--Move the projection fabric in the down end position, ATTENTION do not to exceed the limit
specified in the projection canvas and release the yellow button
As is the case for installation procedures, when the product reaches the end of its useful life, disposal operations must be carried out by qualified personnel.
The product is made up of various types of material: some can be recycled, others have to be disposed of. You must follow applicable recycling or disposal regulations in
force in your area for this product category.
As shown in the picture on the left, you must not throw the product into a domestic litter bin. Either dispose of the various components separately, pursuant to the
regulations applicable in your territory, or hand the product over to a vendor upon purchasing a similar new product.
Warning: local regulations can foresee heavy fines in case of unlawful disposal of this product.
1.LIMITED WARRANTY 1.LIMITED WARRANTY Screen Research warrants the product designated herein to be free of manufacturing defects in material and workmanship, subject to the term and conditions hereinafter set forth. 1.LIMITED WARRANTY 1.LIMITED WARRANTY
Surface fabric(s) and frames are warranted for a period of five (5) years from the date of invoice by the original purchaser. Motors, motor controllers, remote controls, and related assembly hardware are
warranted for three (3) years parts and labor from date of invoice by the original purchaser.
2.CONDITIONS AND LIMITATIONS 2.CONDIT IONS AND LIMITATIONS This Warranty is subject to the following conditions and limitations. The Warranty is void and inapplicable if the product has been used or handled other than in accordance
2.CONDIT 2.CONDIT IONS AND LIMITATIONS IONS AND LIMITATIONS
with the instructions in the owner's manual, abused or misused, damaged by accident or neglect or in being transported, or the defect is due to the product being repaired or tampered with by anyone other
than Screen Research or an authorized Screen Research dealer or installer. The product must be installed by a professional, duly-authorized Screen Research dealer/custom installer, and maintained
according to the written instructions.
3.RETURNS No product returns accepted without a prior written return authorization from Screen Research. Product must be packed in the original PACKAGE CONTENTS or equivalent packaging in order to 3.RETURNS
3.RETURNS 3.RETURNS
avoid any damage during transportation. The product(s) must be packed and returned to Screen Research or an authorized Screen Research repair center by the customer at his or her sole expense. Screen
Research will pay return freight of its choice. A RETURNED PRODUCT MUST BE ACCOMPANIED BY A WRITTEN DESCRIPTION OF THE DEFECT AND A PHOTOCOPY OF THE ORIGINAL PURCHASE RECEIPT. This
receipt must clearly list model and serial number, the date of purchase, the name and address of the purchaser and authorized dealer and the price paid by the purchaser. Screen Research reserves the right to
modify the design of any product without obligation to purchasers of previously manufactured products and to change the prices or specifications of any product without notice or obligation to any person.
4.REMEDY In the event the product fails to meet the above Warranty, the purchaser's sole remedy under this Limited Warranty shall be to return the product to Screen Research or an authorized Screen 4.REMEDY
4.REMEDY 4.REMEDY
Research service center where the defect will be rectified without charge for parts or labor, during the term of this Limited Warranty.
5.LIMITED TO ORIGINAL PURCHASER This Warranty is for the sole benefit of the original purchaser of the covered product and shall not be transferred to a subsequent purchaser of the product. 5.LIMITED TO ORIGINAL PURCHASER
5.LIMITED TO ORIGINAL PURCHASER 5.LIMITED TO ORIGINAL PURCHASER
6.MISCELLANEOUS 6.MISCELLANEOUS Any implied warranties relating to Screen Research products shall be limited to the duration of this warranty. The warranty does not extend to any incidental or consequential damages to 6.MISCELLANEOUS 6.MISCELLANEOUS
the purchaser. Some states or countries do not allow limitations on how long an implied warranty lasts, or an exclusion or limitation of incidental or consequential damages, so the above limitations or
exclusions may not apply to you. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state, or country to country.
7.WARRANTOR Enquiries regarding the above Limited Warranty may be sent to the following address, specific to country where purchased: 7.WARRANTOR
7.WARRANTOR 7.WARRANTOR
8. WARRANTY SUPPORT MANAGED BY AUTHORIZED 8. WARRANTY SUPPORT MANAGED BY AUTHORIZED DISTRIBUTORS Screen Research has authorized distribution in many countries of the world. In each country, the authorized importing Distributor is 8. WARRANTY SUPPORT MANAGED BY AUTHORIZED 8. WARRANTY SUPPORT MANAGED BY AUTHORIZED
responsible for warranty support of products sold in the respective country by that retailer or distributor. Warranty service should be obtained from the importing retailer or distributor from whom you purchased
your product.
Made by Adeo Screen sp. Z o.o. (Polska) Specifications are subject to change without notice. E&OE
Please verify that you are working with the latest revision of this document before specifying your screen.
Doc: Manual CLCTS-CLCLT rev5 | 03.02.2015| Download at: www.screenresearch.com 2015 AdeoSreen All Rights Reserved.
10 10 10 10 END STOP MOTOR ADJUSTMENT
READ CAREFULLY BEFORE PERFORMING ADJUSTMENTS READ CAREFULLY BEFORE PERFORMING ADJUSTMENTS READ CAREFULLY BEFORE PERFORMING ADJUSTMENTS
-
-Pushed the White and Yellow buttons for unlocked the end-stop positions.
END STOP MOTOR ADJUSTMENT END STOP MOTOR ADJUSTMENT END STOP MOTOR ADJUSTMENT
-Move the projection fabric in the up end position and release the
white button
PRODUCT'S DISPOSAL PRODUCT'S DISPOSAL PRODUCT'S DISPOSAL PRODUCT'S DISPOSAL
WARRANTY WARRANTY WARRANTY WARRANTY
Page 9