Peaq PTV551203 Guide D'utilisation page 37

5. Press MENU to return to the Setup menu.
After configuring, the selected source label will be
displayed after the name of the related connector
in the source list when pressing SOURCE on the
remote control or OK on the TV set.
Note: Not all models have OK button on the set.
Using Electronic programme guide
EPG is an on-screen guide that displays scheduled
TV programmes. You can navigate, select, view and
record programmes.
1. Press GUIDE on the remote control, the Now
and Next EPG menu will appear, which allows
you to get information about the current or next
programme playing on each channel. Navigate
through the different programmes using the
navigation buttons on the remote control.
2. Use the colour buttons to view the 8 Days EPG.
- Prev day (Red): List the previous day's EPG.
- Next day (Green): List the next day's EPG.
- View detail (Yellow): Display the description of
this programme if available.
- Type filter (Blue): Programme guide filter for
digital TV programmes.
Press the blue button to display the
programmes' type and subtype lists.
Navigate through the different types and
subtypes using the navigation buttons on the
remote control.
highlight from the Type list, press OK to select (or
deselect). A checkmark will appear to the left of
the type when selected. When you select a type,
all its subtypes will be selected accordingly.
without selecting any type first.
subtype list.
programmes will be highlighted.
- Add schedule (Option): Press OPTION on the
remote control to bring up the Schedule list
menu. For details on scheduled recording, refer
to the Schedule list section.
3. Press GUIDE/EXIT to exit the EPG and switch to
the selected channel.
PVR (Personal Video Recorder)
Allows you to record your favourite TV programme.
Before you use the function, connect a USB memory
device to the set first.
Note: Feature is available only in selected products
and due to specific TV network limitations and
country technical requirements might not be
available in product or place of installation.
Feature might be also blocked by TV network
due to copyright protection (HD content,
recording protection). Please use OPTION
on the remote control to check if feature is
available in your product.
1. Press OPTION on the remote control and select
Quick access > PVR.
2. Press OK/► to enter.
3. Press:
- the red button to start recording, the record file is
put into a folder named after the channel number
under the PVR folder in Media center > Video;
- the green button to stop recording manually; if
the recording duration finishes, the recording will
stop automatically.
- ▲/▼/◄/► to adjust the recording duration.
4. In recording, PVR mini pane will also show on the
screen to indicate the recording progress.
5. To watch the recorded programme, exit PVR
mode first and go to Media center > Video.
Select the folder PVR, then select the related
record file. Press OK to play. (It is the same if you
record a digital radio programme).
Notes:
- Feature available only for digital non encrypted
channels. Even when CICAM (CI or CI+) is
inserted, feature is not available on encrypted
channels.
- Only supports USB memory device of FAT32
format.
- Before you connect the USB device to the set,
make sure you have backed up the data in the
device to avoid the loss of your important data
due to unforeseen malfunction.
- The bigger the USB device memory size for the
PVR function, the longer the recording time.
- If you want to change channel or signal source
during recording, store the recording data before
changing the channel or source.
- The set cannot play files normally if the
parameters of the file exceed the limitations of
the system, the file format is not supported, the
file is damaged, or the file cannot be decoded.
- Do not disconnect the USB memory device
when the system is reading a file or transmitting
data, otherwise the system or the device may be
damaged.
Schedule list
This function is used to perform scheduled recording.
1. Press OPTION on the remote control and select
Quick access > Schedule list.
2. Press OK to display the schedule list.
3. To add a schedule into your schedule list, press
the red button first to display Schedule list. Then,
EN 15
Using more of your TV