Costway NP10151 Mode D'emploi page 4

1. Unfasten the Velcro straps
and put aside the two bars.
3. Expand the legs.
5. Fasten the bar.
06
2. Unfold the legs of the
camping bed and stand them
on a solid & level ground.
4. Align a bar and insert it into
the bed sleeve.
6. Unfasten the hook&loop of
opposite side and fasten the bar
7. Tighten the fabric and
fasten the hook&loop.
9. Open the FRP poles.
11. Insert short FRP pole to
the tent.
13. Hook the plastic clip onto
the pole.
8. Then the camping bed is
finished.
10. Insert long FRP poles to
the tent.
12. The end of long FRP
pole is inserted to the hole.
14. Tie the rope.
07