Oase BioMaster 250 Notice D'emploi page 18

- EN -
Filter media on delivery:
a Filter foam 30 ppi
b Filter foam 20 ppi
Hel-X Biomedia, always place them
c
contained in the bag into the strainer casing
Cleaning/replacing the filter media
Prerequisite: The unit head is removed.
(→ Dismantling the unit head P.8)
How to proceed:
T
1. Remove all filter baskets.
2. Clean the filter baskets and filter unit.
– Use water to clean the filter media
– If necessary, replace the filter media. Rinse
the new filter media thoroughly with warm
tap water prior to its first use.
3. Carefully fit the filter baskets back into the
bottom recess in the filter unit.
– Ensure that the filter cover is positioned on
the foam filter in the top filter basket.
4. Reassemble the unit in the reverse
(→ ACCESSING THE UNIT
18
order.
)
P.6-8
BioMaster 250/350/600, BioMaster Thermo 250/350/600