Axis A9210 Manuel D'installation page 9

AXIS A9210 Network I/O Relay Module
be UL 294 listed Class 2 low-voltage power SELV
and limited power supply.
- Network Connector – Standard Ethernet
wiring. Evaluated by UL when powered
from AXIS Midspan 30 W, Model POEA30U-1ATE
in PoE Mode B (alternative A). The midspan PSE or
power injector can be located at any point within
the defined structured cabling channel compliant
to the Standard for Balanced Twisted-Pair
Telecommunications Cabling and Components,
ANSI/TIA-568-C.2, between the network switch
and the powered device (PD).
• System considerations
- Monitoring software was not evaluated by UL, and
is for supplemental use.
• Maintenance instructions
- For maintenance instructions and for information
about how to configure the Axis product, see the
User Manual.
• Further information
- Card formats verified by UL: ISO Cards Mifare 1K,
32 bits.
- Firmware version: 1.x.x.x
• Power
- Power in: 12 V DC, max 36 W.
Power over Ethernet (PoE) IEEE 802.3at,
Type 2 Class 4
- Power out relay: 12/24 V DC, max 24 W
With PoE: max 350 mA at 12 V DC, max 150 mA at
24 V DC, max 4.5 W
With PoE+: max 1100 mA at 12 V DC, max
500 mA at 24 V DC, max 14 W
With DC in: max 2000 mA at 12 V DC, max
1000 mA at 24 V DC, max 24 W
9