Publicité
Les langues disponibles
Les langues disponibles
AXIS A9210 Network I/O Relay Module
•
All interconnecting devices shall be UL listed and Class 2
low-voltage power limited.
•
All power outputs are Class 2 outputs.
•
All wiring methods shall be performed in accordance with
ANSI/NFPA70, local codes and authorities having jurisdiction.
•
The wiring of the door relay is limited only inside of the
protected area.
•
Recommend to use UL recognized grounding wire, a size
of 14-16 AWG, yellow/green color. Crimp the cable on the
non-insulated wire pressure ring terminal which is being
delivered as a spare part of the product. Important to use
proper crimping tool and techniques to ensure the safety of
product and user.
•
When the Axis product has reached the end of its useful life,
dispose of it according to local laws and regulations. The
product should not be disposed of together with household or
commercial waste. See Disposal and recycling on page 4 .
•
Do not connect the Axis product to a receptacle controlled
by a switch.
•
Battery
-
The 3.0 V lithium battery used by the Axis product
is a UL recognized component. (Type: BR2032,
diameter: 20 mm (0.78 in), manufacturers: Power
Glory (Omnergy)). The following battery type is
also a UL recognized component: Type CR2032.
-
Users shall not replace the battery. If the battery
needs replacing, it must be done by a trained
technician only.
-
Used batteries shall be disposed of according
to local laws and regulations, which may vary
from state to state. Waste BR/CR lithium cells
are neither listed nor exempted from the USEPA
hazardous waste regulations. Waste lithium
batteries can be considered reactive hazardous
waste if there is a significant amount of unreacted,
7
Publicité
