Publicité
Les langues disponibles
Les langues disponibles
2. Insert the cutting disc resp. replace the worn disc. Make sure
to attach the inner flange first, then the cutting disc and finally
the outer flange.
Shaft Lock (5)
Safety Hood (1/4)
Inner Flange
Grinding Disc
Outer Flange
For discs up to 3 mm strong install the outer flange with the flat
side to the disc (Fig. A), for discs stronger than 3 mm install the
outer flange with the stepped side to the disc (Fig. B).
Fig. A
Make sure the cutting disc rotates in the direction of rotation
(6) printed on the machine housing.
After installing a disc perform a brief test run. Discs which
cause vibrations and run unround must be replaced
immediately.Keep the disc away from moisture and oil and
protect it from either hitting or severely bumping against any
object.
Operation
Fig. B
35
Publicité
