Télécharger Imprimer la page

Candy CI633CTTWIFI Manuel D'instructions page 14

Publicité

Les langues disponibles

Les langues disponibles

3. Turn the whole cooktop off by touching the
ON/OFF control.
4. Beware of hot surfaces
'H' will show which cooking zone is hot to touch. It will disappear when the
surface has cooled down to a safe temperature. It can also be used as an
energy saving function if you want to heat further pans, use the hotplate
that is still hot.
In case of a power interruption while "H" is on, please pay attention to not
touch the cooking surface even if "H" is no longer shown when the power is
back.
Using the Power Management
Using power managerment you can set the total power to 2.5kW/ 3.0kW/ 4.5kW/
6.5kW and 7.4kW. The default total power setting is the maximum power level.
Setting the total power level to fit your requirement
1. Make sure the cooktop is turned off.
Note: you can only set power management when the cooktop is turned off.
2. Touch the button "pause function" and hold for 5 seconds. You can
hear the buzzer beeps one time.
3. After you hear the beep, touch "+" and "-" button at the same time
and hold for 3 second, the timer indicator will show flashing previous total power
level, e.g. '2.5'. Touch and hold " +" and "-" for 1 second again to switch to other
power level, for example 3.0. When the power that you want is flashing, touch the
button "pause function" and hold for 5 seconds. The buzzer will beep 10 times. It
means you have finished the
setting.
EN-13

Publicité

loading