Kin HNB 400 Auto A Mode D'emploi page 9

HNB 400 Auto A
GB
5. Cleaning
Clean the equipment from the outside. Flush with clean water. Use
brush and detergent to remove stubbom pollution. Immerse the pump
into a container with clean water, open it for running a while, and flush
it in the pump.
Attention: before using the pump again, first ''clean'' to prevent any
possible dirt residue which could affect the equipment operation.
Storage
If there is a risk of frost, remove equipment and accessories, and clean
and store it in a place protected from frost. Frost will destroy electrical
appliances and accessories, because they always contain water.
Using scope
The pump is mainly used in a basement. When installed at the bottom
of the shaft, the pump prevents deeper in the basement. It can also be
used for water supply and drainage, such as household, agriculture,
gardening, pipelines and other suitable occasions.
9
kinpumps.com