Publicité
Les langues disponibles
Les langues disponibles
5.2 Capacity Setting
Note: The inverter module can be operated manually or automatically at regular intervals.
The system automatically saves the 4 latest valid settings.
Key
1
2
3
5.3 Timer Setting
*Overlap setting of time will be considered as invalid, the pump will only run based on the
previous valid setting.
*During timer setting, if you want to return to the previous setting, hold
1.Enter timer setting
2.Set current time
3. Move to next step
4.Decide the specific capacity
5.Repeat above steps to set other
3timers
6. Hold 3 seconds to save setting
7.Check 4 timers to make sure there
is no invalid setting
Press >3 seconds to unlock the screen;
Press <3 seconds for backwash mode;
Under backwash mode, pump will count down in 180s, use or to adjust
backwash time from 30-900s.
Press the button to start. The pump will run at full capacity (100%) .
Use
or
to adjust by 5% to a specific running capacity if needed.
5
Description
for3 seconds.
or
Publicité
