INVERSilence Tech InverSilence15 Manuel D'installation & D'utilisation page 12

Item Code
1 E001
2 E002
3 E101
4 E102
5 E103
6 E201
7 E202
8 E203
9 E204
10 E205
11 AL01
Note:
1. AL01 is not an error indication: when it appears the inverter will automatically switch to a
lower capacity to self protect against high internal temperature. When the temperature drops
back to 68℃ the inverter will resume at the preset speed.
2. When causes for E002/E101/E103 lifts, the device will resume working automatically,
however when it appears a fourth time, the device will stop working, to resume operation,
unplug the device and plug in & restart again.
10.
MAINTENANCE
Description
Abnormal input voltage
Output over current
Heat sink over heat
Heat sink sensor error
Master driver board error
Circuit board error
Master board EEPROM reading
failure
RTC time reading error
Display board EEPROM reading
failure
Communication error
Auto speed reduction against
high temperature
Analysis
Not faulty
Not faulty
Contact your supplier
Contact your supplier
Contact your supplier
Contact your supplier
Contact your supplier
Contact your supplier
Contact your supplier
Contact your supplier
Contact your supplier
10