Artidor AR-081 Mode D'emploi page 8

E
Diagram pressure loss AR-081 bulkhead fitting
4. Conformity to EU Directives and standards
Bulkhead fitting AR-081 complies with European Directive 2014/34/EU (ATEX) and fulfils
EN 50014:1997 and EN 50018:2000 (equivalent to international standard EN 60079-0 and
EN 60079-1). The bulkhead fitting is therefore suitable for mounting in the wall of enclosures
with protection degree against ignition flameproof Ex d, ATEX Group II, Category 2 G.
The design, production and testing of bulkhead fitting AR-081 conforms to the actual state of
the art and with recognized quality standards.
5. Application
The flameproof bulkhead fitting is suitable for use in hazardous locations classified as zone 1
and 2 in accordance with EN 60079-10.
All parts of the fitting are manufactured out of AISI 316 stainless steel with guaranteed
corrosion resistance, as it is proof against the effects of the most common chemicals. In the
case of unusual chemicals, please contact the manufacturer.
Installation manual AR-081 bulkhead fitting
8 / 44
Flow (l/min)
03-2024