Publicité
3.
4.
5.
6.
2 / 20
Refer to device manual for wiring details. Module provides
terminals for Zone input, and Positive/Common for power.
Power is taken from BUS power, refer to main panel manual
for current limitations for the relevant standard.
7.
Put a jumper across TERM on the first and last device on
a cable run to ensure correct RS-485 termination and avoid
communication issues with signal reflection, etc.
8.
9.
EOL
Power for zone
1..2..3...
P/N 466-2715 • REV A • ISS 23MAY16
Publicité
