Hiyasu ASE 7Ui Manuel D'instructions page 87

06Manual 11Hiyasu Eng 19/4/06
Cool Operation
(1) Unit start
Link with electronic power.
Press ON/OFF on the remote controller, unit starts.
The liquid crystal will display the working state of last time (Except Timer, Sleep,
Power/Soft and Health airflow).
2) Select operation mode
Press MODE button. For each press, operation mode
changes as follows:
Select COOL operation
Then
(3) Select temp.setting
Press TEMP. button.
Every time the button is pressed, temp.setting increase 1º C,if kept depressed,
it will increase rapidly
Every time the button is pressed, temp.setting increase 1º C,if kept depressed,
it will decrease rapidly
Select a desired temperature.
(4) Fan speed selection
Press FAN button. For each press, fan speed changes as
follows:
Air conditioner is running under displayed fan speed
When FAN is set to AUTO, the air conditioner
automatically adjusts the fan speed according to room
temperature.
(5) Unit stop
Press ON/OFF button, the unit stops.
13:20 Página 85
OPERATION
Remote controller Telemando
85