Danby MFM-7B1 Manuel Du Propriétaire page 14

CARE AND MAINTENANCE
TURNTABLE RESET
When a program fi nishes the turntable will rotate
until it returns to the same position it was in when
the program was started so that handles are pointed
toward the door. This means that the turntable may
keep turning after the program is completed to
ensure that the dish is oriented toward the door.
Please do not open the door until the turntable has
completely stopped moving.
Note that this feature will only engage at the end
of a cooking program. If a program is paused
during operation, the turntable reset feature will not
engage.
To disable the turntable reset feature, press and hold
the number 9 on the keypad for 3 seconds. The
display will show "OFF" and the turntable will no
longer reset at the end of a cooking program.
To enable the turntable reset feature, press and hold
the number 9 on the keypad for 3 seconds. The
display will show "On" to confi rm that the turntable
reset feature is active.
MICA SHEET
Inside the appliance there is a cardboard mica
sheet protecting the magnetron. Do not remove this
from the appliance as exposing the magnetron to
food splatters can cause arcing or fi re. If it becomes
dirty, the mica sheet can be cleaned with a warm
cloth.
DISPOSAL
This product should not be treated as ordinary
household waste, it should be transported to the
appropriate collection point for the recycling of
electrical components. For information on local
waste collection points, contact your local waste
disposal agency or government offi ce.
TROUBLESHOOTING
No power
• A fuse may be blown or the circuit breaker
tripped
• Plug not fully inserted into the wall outlet
Arcing or sparking during operation
• Metallic items were left in the appliance during
operation
• The appliance is being operated while empty
• Spilled food has built up inside the appliance or
on the mica sheet
Unevenly cooked food
• Food was not completely defrosted before
cooking
• Cooking time or power level were insuffi cient
• Food was not turned or stirred during cooking
Overcooked food
• The power level or cooking time were too high
Undercooked food
• Food was not completely defrosted before
cooking
• Cooking time or power level were insuffi cient
• Food was not turned or stirred during cooking
• Ventilation openings are blocked
Poor defrosting
• Defrosting time or power level were insuffi cient
• Food was not turned or stirred during defrosting
Reset buttons are illuminated
• There is no power to the outlet due to excessive
power load. Unplug the device and press the
reset button to restore power to the outlet.
13