Publicité
Les langues disponibles
Les langues disponibles
Failures
The heating indicator
light is off.
No water coming out
of the hot water outlet.
The water temperature
is too high.
Water leak
Thermal Cut Out
Brown
L
Yellow/Green
E
N
Blue
Reasons
Failures of the
temperature controller.
1. The running water supply
is cut off.
2. The hydraulic pressure
is too low.
3. The inlet valve running
water is not open.
Failures of the temperature
control system.
Seal problem of the joint
of each pipe.
Q
Q
Contact with professional
staff for repair.
1. Wait for restoration of running
water supply.
2. Use the heater again when
the hydraulic pressure is
increased.
3. Open the inlet valve
running water.
Contact with professional
staff for repair.
Seal up the joints.
Heating element
Transformer
Relay
Power panel
10
Treatment
N
Control panel
Temp.
sensor
Publicité
