Blaupunkt MF 250 Mode D'emploi page 21

Changing the Device keys
If you want, you can change any of the device keys to
operate another type of device.
Example 1:
To program a Television on the VCR key (for example), you need
to change the VCR key into a TV key, so press:
(*)
The VCR key has now become a TV key.
Now enter the Set Up code for your TV by pressing:
Example 2:
To program a Television on the SAT key (for example), you need
to change the SAT key into a TV key, so press:
(*)
The SAT key has now become a TV key.
Now enter the Set Up code for your TV by pressing:
Resetting a Device key
To reset the VCR key to its original mode, press:
(*)
To reset the SAT key to its original mode, press:
(*)
(*) Press and hold down the SETUP key until the red
light (LED) blinks twice.
(**) The red light (LED) blinks twice.
(*)
_ _ _ _
(*)
_ _ _ _
20
(**)
(TV code)
(**)
(TV code)
(**)
(**)
(**)
(**)