Publicité
Les langues disponibles
Les langues disponibles
Search Procedure
If your device does not respond to the MF-250 universal remote
after you have tried all the codes listed for your brand, you may
need to search for your code. This method may also work if your
brand is not listed at all.
Example: to search for your Television Code:
1. Switch your Television on (not on standby).
2.
3.
4.
5.
6.
7.
- Most TV's do not switch on pressing the POWER key. Please try
pressing a "number" key to switch your TV back on.
- If you cannot control your Television properly, please continue
the Search Procedure, you may be using the wrong Code.
- To search for the code for another device follow the instructions
above only press the appropriate device key instead of TV during
step 2.
- If the original remote control of your Video recorder or DVD
player does not have a POWER key, press PLAY instead of POWER
during step 5.
Press the TV key on your MF-250.
Press and hold down the SETUP key until the
red light (LED under device key) on the MF-250
blinks twice.
Press 9 9 1, the red light will blink twice.
Next, press POWER.
Aim the MF-250 at your Television. Now press CH+
over and over, until your Television turns off (every
time you press the CH+ key the MF-250 will send
out a POWER signal from the next code contained
in the memory). You may have to press this
key many times (up to 150 times) so please
be patient.
If you skip past a code, you can go to the previous
code(s) by pressing the CH- key. Remember to
keep pointing the MF-250 at your Television while
pressing this key.
As soon as your television turns off, press SETUP
to store the code.
18
Publicité
