Publicité
SAFETY
GENERAL SAFETY INSTRUCTIONS FOR POWER
TOOLS
Using power tools of any kind can be dangerous if safe operating
procedures are not followed. Recognizing the hazards of each
tool and using them with respect and caution will considerably
limit the possibility of personal injury. However, if safety
precautions are ignored, personal injury will likely result. Always
use common sense - your personal safety is your responsibility.
1. Know your power tool. Read and understand the Operator's
Manual and observe the warnings and instruction labels affixed to
the tools.
2. Properly ground all tools.
3. Keep work area clean and dry.
4. Keep children away.
5. Use correct tools for the job.
6. Wear safety apparel.
7. Wear safety glasses/ goggles.
8. Never stand or sit on tools.
9. Think Safety. Safety is a combination of operator awareness,
common sense and alertness at all times.
10. Not suitable for long serrations.
SAFETY INSTRUCTIONS FOR MITER SAW STANDS
1. Use caution when folding or unfolding legs to limit any finger
pinch points.
06
2. Place stand on flat and level surface to keep from rocking or
tipping.
3. Make sure that work support extensions are within safe
operating limits, and are properly locked in place before using
tools.
4. Test the setup for stability before proceeding with work.
5. Be sure the miter saw is tightened securely at all mountings
before use or folding the stand for transport.
DE
07
Publicité
