Skil F0150761 Serie Notice Originale page 10

High-pressure washer
INtRoDUCtIoN
• This tool has been designed for cleaning areas and
objects outside the house, vehicles and boats
• This tool is intended for domestic use only and is not
designed to operate with water from sources other than a
watertap
• This tool is not intended for professional use
• Check whether the packaging contains all parts as
illustrated in drawing 2
• When parts are missing or damaged, please contact your
dealer
• Read this instruction manual carefully before use
and save it for future reference 3
• Pay special attention to the safety instructions and
warnings; failure to follow these may result in
serious injury
tECHNICAL DAtA 1
Working pressure (P)
Maximum working pressure (Pmax)
Inlet pressure
tooL ELEMENtS 2
A Trigger lock
B Trigger
C Inlet connector
D Water inlet
E Water filter
F Mains switch
G Spraying nozzle
H Detergent bottle
J Detergent nozzle
K Upper spray lance
L Lower spray lance
M Hand gun
N Storage component
P Cleaning needle
Q High-pressure hose
R Water outlet
S Ventilation slots
t Connection for storage component
SAFEtY
GENERAL
• this tool can be used by
children aged 8 and above and
by persons who have physical,
sensory or mental limitations
or a lack of experience or
knowledge if a person
responsible for their safety
supervises them or has
0761
• Supervise children (this will
• Cleaning and user
• Use the tool and its accessories in accordance with this
• Never draw in solvent-containing liquids, undiluted
7 MPa
10,5 MPa
0 - 0,4 MPa
• Only use the tool when the ambient temperature is
• Start working only when tool and operating
• Be aware of the kickback forces that occur when starting
• Never clamp the trigger in position during operation
• Never direct the water jet towards other people,
• Never leave the tool unattended while the motor is
• Do not operate the tool in potentially explosive locations
• Always switch off tool, disconnect plug from power
PERSoNAL SAFEtY
• Wear suitable protective clothing to protect against
• Do not use the tool with other persons in the vicinity
• Do not spray materials containing asbestos and other
• Only clean tyres/tyre valves from a minimum distance of
• Do not direct the water jet against yourself or others
WAtER SUPPLY
• Only use the high-pressure hose and coupling
10
instructed them in the safe
operation of the tool and they
understand the associated
dangers (otherwise, there is a
danger of operating errors and
injuries)
ensure that children do not play
with the tool)
maintenance of the tool shall
not be made by children
without supervision
instruction manual and in the manner intended for the
tool; use of the tool for operations, different from those
normally expected to be performed by the tool, could
result in a hazardous situation
acids or solvents (e.g. petrol, paint thinners, heating
oil); these liquids produce a highly flammable, explosive
and toxic sprayed vapour and they also corrode the tool
components
between 0°C and 40°C
equipment are in perfect condition and safe to
operate
the high-pressure washer; hold hand gun and spray lance
firmly and take a secure stance
animals, live electrical equipment or the tool itself 4
running
source, and ensure there is no water pressure in
tool and hand gun before adjusting, cleaning or
changing accessories
splashing water
unless they wear protective clothing
materials which contain substances which are hazardous
to your health
30 cm to prevent damaging them (damaged vehicle tyres
may lead to fatal accidents)
in order to clean clothes or footwear
supplied with the tool