Uline Classic Serie Mode D'emploi page 2

1. Install one cam lock pin (A) in back panel (1). Insert
one cam lock (B) into corresponding hole in bottom
panel (2). Fit back panel and bottom panel together
and turn cam lock clockwise until it locks.
(See Figure 1)
NOTE: Cam lock caps can be applied once
cam locks are tightened for a finished look.
Figure 1
1
2. Install one cam lock pin (A) in bottom panel (2).
Insert one cam lock (B) into corresponding hole
in skirt panel (3). Fit bottom panel and skirt panel
together and turn cam lock clockwise until it locks.
(See Figure 2)
Figure 2
1
3. Install four cam lock pins (A) and four dowels (C)
in right side panel (5). Insert cam lock (B) into
corresponding holes in bottom panel (2) and
back panel (1). Fit side panel together with pieces
assembled in Steps 1 and 2 and turn each cam lock
clockwise until it locks. (See Figure 3)
PAGE 2 OF 9
ASSEMBLY CONTINUED
2
A
3
2
B
Figure 3
4. Repeat step 3 to attach left side panel (4) with
pieces assembled in steps 1 and 2. (See Figure 3)
5. Insert four adjustable glides (D) into holes on
B
F
bottom of side panels. Glides can be adjusted to
compensate for uneven floors. (See Figure 4)
Figure 4
A
6. With second person, set bookcase upright.
(See Figure 5)
G
Figure 5
A
2
3
1
B
G
5
1
2
4
5
D
0523 IH-6284