Texas A/S TP500 Manuel De L'utilisateur page 20

Start and stop of engine
REMEMBER: Always check engine oil before start!
Oil level must be between min. and. max on the oil stick.
Fill with SAE-30 oil.
Only use unleaded petrol octane 95 for the engine. Never overfill the tank.
A
• Pump the primer (B) according to the scheme below :
• Pull the handle (A), which loosens the knife brake, towards the handle and pull the
starting cord. Let the starting cord carefully return to the engine.
The handle (A) must be pulled towards the steering handle while using the machine.
When the handle is released, the engine (and the knife) stops in 5 seconds.
Temperature
> 0° C
> 0° - 10° C
> 10° C
Air filter
The fir filter must be checked and cleaned regularly. If the filter has not been cleaned for
some time, the power of the engine is reduced, and the engine may be damaged.
Push
2-3
1-2
0-1
20
B