Sophos XGS 7500 Guide De Démarrage Rapide page 9

ENGLISH
7. Appliance LED Codes
Status LEDs
Power 1 Green
Red
Power 2 Green
Red
SSD Blue
BP 1/2 Green
BP 3/4 Green
LEDs on each RJ45 Ethernet connector
ACT/LNK Green
(Left LED)
Speed Amber
(Right LED)
Green
LEDs on each SFP+ connector
ACT/LNK Green
(Left LED)
Speed Blue
(Right LED)
Amber
8
Solid Power Supply 1 Active.
Solid Power Supply 1 Failure.
Solid Power Supply 2 Active.
Solid Power Supply 2 Failure.
Flashing SSD reading/writing data.
Solid Bypass mode on Ports 1/2 enabled.
Off Bypass mode on Ports 1/2 disabled and inactive.
Solid Bypass mode on Ports 3/4 enabled.
Off Bypass mode on Ports 3/4 disabled and inactive.
Solid 1. The Ethernet port has established link.
2. Good connection between the Ethernet port and hub.
Flashing The adapter is sending or receiving network data.
Off No connection.
On If Ethernet port is operating at 1000 Mbps.
On If Ethernet port is operating at 100 Mbps.
Off If Ethernet port is operating at 10 Mbps.
Solid 1. The SFP+ connector is receiving power.
2. Good connection between the SFP+ port and hub.
Flashing The adapter is sending or receiving network data.
Off No connection.
On If SFP+ connector is operating at 10,000 Mbps.
On If SFP+ connector is operating at 1,000 Mbps.
Off No connection.
Quick Start Guide XGS 7500/8500