Sophos XGS 7500 Guide De Démarrage Rapide page 10

LEDs on each QSFP28 connector
ACT/LNK Green
*
(Left LED)
Speed Blue
*
(Right LED)
Amber
Back side
Power Supply Green
8. Support and Documentation
For more information and technical support, please visit
your local Sophos reseller.
Check our Getting Started resources to find out how you can get the most out of your purchase
www.sophos.com/get-started-firewall
Quick Start Guide XGS 7500/8500
Solid 1. The QSFP28 connector is receiving power.
2. Good connection between the QSFP28 port and hub.
Flashing The adapter is sending or receiving network data.
Off No connection.
Slow single blink If QSFP28 connector is operating at 25 Gbps or 100 Gbps (XGS 8500 only).
Slow double blink If QSFP28 connector is operating at 50 Gbps (XGS 8500 only).
Solid If QSFP28 connector is operating at 10 Gbps or 40 Gbps.
Solid If QSFP28 connector is operating at 1 Gbps.
Off No connection.
Solid Power
Off No power
www.sophos.com/en-us/support
* When using a breakout cable, the ACT/LNK LED will indicate that any of the ports has a connection
or contact
while the Speed LED will indicate the highest speed of all ports that have a connection.
ENGLISH
9