Philips Baristina BAR300 Mode D'emploi page 15

English
18
4 Insert the portafilter. Make sure that there is no coffee puck in the portafilter.
Note: The portafilter needs to be inserted to be able to start the descaling
process.
5 Press and hold the the Espresso and Lungo buttons together for 5 seconds
until the Espresso button starts to blink slowly and the Lungo button is on
continuously.
6 The machine dispenses the entire descaling solution at regular intervals. This
takes up to 30 minutes.
7 Wait until the Lungo button starts to blink fast and the Espresso button is on
continuously. The first phase of the descaling cycle has finished.
8 Remove and empty the container.
9 Place the container back under the coffee spout.
10 Remove the water tank and rinse it under the tap. Fill the water tank with
cold tap water and place it back in the machine.