Publicité
Figure 10: LAN2 Connection to Customer Network
(OrCU3000 only) Reattach the High Voltage Shield to the cabinet using the Phillips
8
screwdriver and the three M4x10 screws that were removed earlier (see
Figure 11: Reattach Electrocution Shield
Note: Follow any local requirements for inspection of retrofit and components before
MDE-5568A CFN PLUS and Fuel Truck Controller PLUS nOrCU Retrofit Kit (M09680B167) Installation Instructions • April 2021
restoring power to the unit. Refer to MDE-5414 ForeHB SiteOmat Setup and
Maintenance Manual, for installing software and configuring the SiteOmat software.
Replacing the Fuel Controller
Figure
11).
Page 15
Publicité
