Publicité
Use the cutter to cut the cable ties attaching the OrCU-N harness and LAN cable to the cabinet
3
door and separate the LAN cable (see
Figure 2: Detach Power Harness and LAN Cable
Use new cable ties to reattach only the OrCU-N harness to the cabinet door in the same
4
location where the LAN harness was previously affixed (see
Figure 3: Reattach Power Harness to Door
MDE-5568A CFN PLUS and Fuel Truck Controller PLUS nOrCU Retrofit Kit (M09680B167) Installation Instructions • April 2021
Figure
2).
Figure
Replacing the Fuel Controller
3).
Page 11
Publicité
